9
Features
• If you plan to install the camera in a
location that has conditions not rec-
ommended in this manual, consult
with a professional installer and con-
sider use of a separate camera
cover or housing.
• Before starting a permanent installa-
tion, have another person hold the
camera while you verify its perfor-
mance by observing on the monitor.
This helps determine the best final
position for your camera.
LIGHTING AND YOUR
CAMERA’S LOCATION
Though the camera is highly sensitive, it
cannot “see” in total darkness over a
wide area. To assist the camera’s night
vision, install a 100-watt incandescent
lamp (which is rich in infrared radiation)
49-2536.fm Page 9 Tuesday, October 10, 2000 11:38 AM
To Next Page
Loading...
Need help?
General
