Radio Shack Cassette Tape Recorder - Recording; Using the Built-In Microphone; VOX Recording

11
Recording

Recordin
g
For the best performance, use only regular length (60- or 90-
minute), normal bias cassette tapes. We do not recommend
long-playing cassette tapes, such as C-120s, because they are
extremely thin and can tangle easily.
USING THE BUILT-IN MICROPHONE
You can pop up the built-in microphone to direct it to the sound
source, or you can connect an external microphone (see “Using
an External Microphone” on Page 14).
1. Slide
MIC POP-UP
in the direction of the arrow.
2. Slide
MIC SENSITIVITY
to
LOW
,
MEDIUM
or
HIGH
, depending
on the sound source you want to record.
For normal recording conditions, set the switch to
MEDIUM
.
If the sound source is weak, slide it to
HIGH
. For a strong
sound source, slide it to
LOW
.
3. To return the microphone to its original position, gently
press it down until it locks into place.
VOX RECORDING
When you select VOX recording, the recorder automatically be-
gins recording when it receives a sound signal, and automati-
cally stops when the sound stops.