Radio Shack Cassette Tape Recorder - Advanced Recording Features; External Microphone Usage; Recording from External Sources

13
Recording
The ALC (automatic level control) circuit automatically sets
the recording level and the REC/BATT indicator flashes to
show that recording is in progress.
Note:
If the audio input is too strong, the REC/BATT indica-
tor lights steadily.
7. To pause recording while the sound continues, slide
PAUSE
to
ON
. Slide
PAUSE
to
OFF
to resume recording.
Caution:
Never try to force down
RECORD
if you have
removed the cassette’s erase protection tab (see “Prevent-
ing Accidental Erasure” on Page 15). This can damage the
record/play mechanism.
8. Recording stops when the sound stops. Press
STOP
to stop
recording sooner.
MANUAL RECORDING
Manual recording is like VOX recording, except you control
when recording begins and ends.
1. Set
VOX/TONE
to
OFF
.
2. Press
RECORD
to begin recording.
3. Press
STOP
to stop recording, or slide
PAUSE
to
ON
to
pause recording.