14
Warning:
Do not mount the detector on a visor if this
places the detector near the driver’s or a passenger’s
head.
Follow these steps to use the sun visor clip.
1. Slide the sun visor clip into the bracket holder’s slot.
Note:
For proper mounting, you must attach the
bracket holder as shown. Do not reverse it.
2. Snap the bracket holder onto the top of the detector.
Make sure the mounting tabs inside the bracket
holder fit into the mounting slots on the sides of the
detector.
22-1676.fm Page 14 Friday, August 6, 1999 10:38 AM
To Next Page
Loading...
