24
When your detector senses a
radar
signal, it responds
with different audible and visual alarms to indicate the
signal type for X- and K- or Ka-band radar signals.
When your detector senses
instant-on radar
, it sounds
continuous beeps, then all indicators light.
When your detector senses a traffic
laser
, both the X- and
K/Ka indicators flash, and the detector sounds continuous
tones for 3 seconds.
When your detector senses an
alert signal
from either a
Safety Warning System or Safety Alert transmitter, it
responds with distinctive audible and visual alarms to
indicate a stationary road hazard (S), emergency/slow
moving vehicles (M), or a train in transit (O).
When your detector senses a
VG-2
signal, it sounds a
distinctive tone and the VG-2 indicator lights. Your
detector checks every 30 seconds for a VG-2 signal. It
does not respond to any radar source during a VG-2
alert, but laser alerts are not affected.
22-1676.fm Page 24 Friday, August 6, 1999 10:38 AM
To Next Page
Loading...
