19
Operation
1. To redial a number, press
OFF
then press
OK
.
REDIAL
MEMORY
appears.
2. Press
OK
then press
9
99
9
or
8
88
8
to select the desired stored
number from R1 to R5.
3. Press
TALK/FLASH
. The phone dials the stored number
and the handset shows the number dialed.
Notes:
• The redial memory only stores the first 20 digits of any
number dialed.
• The dialed numbers are saved only if
TALK/FLASH
is
pressed.
• We recommend you do not use
REDIAL
MEMORY
when
you have pulse telephone service to dial a number that
includes a tone entry (see “Using Tone Services On a
Pulse Line” on Page 21).
•The
REDIAL
MEMORY
does not store a FLASH (switch-
hook) entry. It saves the digits before you press
TALK/
FLASH
. After the call is completed, the digits dialed after
FLASH are saved to another redial memory location.
• The digits displayed will be included in memory dialing.
43-1106.fm Page 19 Wednesday, April 26, 2000 10:30 AM
To Next Page
Loading...
