20
Operation
USING FLASH
Press
TALK/FLASH
to perform the switchhook operation for spe-
cial services, such as Call Waiting.
For example, if you have Call Waiting, press
TALK/FLASH
to
take an incoming call without disconnecting the current call.
Press
TALK/FLASH
again to return to the first call.
Note:
If you do not have special phone services, pressing
TALK/
FLASH
might disconnect the current call.
USING MUTE
Follow these steps to mute the outgoing audio.
1. Press
OK
.
MUTE
MICROPHONE?
appears on the display.
2. Press
OK
again to mute the microphone.
MICROPHONE
MUTED
appears on the display.
3. Press
TALK/FLASH
to resume the call.
End the call using any of these methods:
• Place the handset on the base.
• Press
TALK/FLASH
then
OFF
.
• Press
OFF
twice.
43-1106.fm Page 20 Wednesday, April 26, 2000 10:30 AM
To Next Page
Loading...
