Radio Shack ET-1106 - Reviewing Numbers Stored in Memory; Deleting a Number from Memory; Dialing a Stored Number

24
Operation
Reviewing Numbers Stored in Memory
1. Press
OK
on the handset then press
9
99
9
or
8
88
8
until
SPEED
DIAL
MEMORY
appears.
2. Press
OK
on the handset.
SPEED DIAL LOCATION_
_
appears.
3. Enter the memory location number on the keypad (01, 02,
03, and so on) to display the stored number.
Note:
You can also locate numbers stored in memory by press-
ing or holding
9
99
9
or
8
88
8
.
Dialing a Stored Number
1. Lift the handset and press
OFF
.
2. Press
OK
then press
9
99
9
or
8
88
8
until
SPEED DIAL MEM-
ORY
appears.
3. Press
OK
then enter the 2-digit memory location number or
hold down
9
99
9
or
8
88
8
to locate the stored number you wish
to dial. The memory location and number displays.
Note:
If you forget the memory location number, press
9
99
9
or
8
88
8
to search through the 20 memory locations.
4. Press
TALK/FLASH
. The phone dials the number.
Deleting a Number from Memory
1. Press
OFF
on the handset.
43-1106.fm Page 24 Wednesday, April 26, 2000 10:30 AM