37
5. Press
▲
. The HTX-242 displays
tC
and the currently set
transmit tone.
6. Rotate
TUNE
, or press
UP
or
DOWN
on the microphone, to set
a different transmit tone. If you do not want a transmit tone,
select
oFF
.
7. Press
T- S Q L
or PTT to save the settings.
Activating Subaudible Tone Transmit and Squelch
1. Press
T- S Q L
once.
T
appears. The HTX-242 includes the
selected transmit tone with your transmissions.
2. Press
T- S Q L
again.
T-SQL
appears. The HTX-242 includes
the selected transmit tone with your transmissions and
requires the selected receive tone to open squelch.
3. Press
T- S Q L
a third time to turn off both subaudible tone
transmit and squelch. Neither
T
nor
T-SQL
appears on the
display.
Setting the DTMF Page and Subaudible Tone Alert
When the alert function is turned on, the HTX-242 sounds a
sequence of three tones when it receives a DTMF page (if DTMF
page is activated) or a transmission that includes the correct sub-
audible tone (if tone squelch is activated).
To turn on the alert function, press
F
then
ALT
.
ALT
appears. To
turn off the alert function, press
F
then
ALT
again.
ALT
disappears.
To Next Page
Loading...
