Radio Shack HTX-242 - Understanding the Display; VFO and Duplex Mode Indicators; Operational Indicators

14
Understanding the Display
One or more of the following indicators appear when you turn on
and use your HTX-242.
VFO-A
or
VFO-B
— appears when you select one of the VFO
modes. See “Dual VFO Modes” on Page 12.
VFO-A-T
VFO-B
— appears when you select the DUP-A mode (transmit
on VFO-A and receive on VFO-B). See “Using the Dual VFOs for
Duplex Operation” on Page 27.
VFO-A
VFO-B-T
— appears when you select the DUP-B mode (receive on
VFO-A and transmit on VFO-B). See “Using the Dual VFOs for
Duplex Operation” on Page 27.
BUSY
— appears when the HTX-242 is receiving a transmission.
See “Receiving Transmissions” on Page 22.
FUNC
— appears after you press
F
. Flashes after you hold
F
for at
least 1 second.
LOCK
— appears when you lock the HTX-242’s functions. See
“Locking the Controls” on Page 17.
T
— appears when transmit subaudible tone is turned on. See
“Using Subaudible Tones” on Page 36.
T-SQL
— appears when both transmit subaudible tone and sub-
audible tone squelch are turned on. See “Using Subaudible Tones”
on Page 36.
ALT
— appears when you turn on the DTMF page/subaudible tone
alert. See “Setting the DTMF Page and Subaudible Tone Alert” on
Page 37.