Radio Shack PC-2 TRS-80 - Page 18

When the Computer is turned on, there are four different power-up messages which can be displayed:
DEG
:: i ... : i··· Ii:::;:::: i<:
PRO
This message can appear on power-up after:
• Turning the Computer on for the first time.
• Battery replacement.
• Pressing ALL RESET.
To clear the Display and begin computing:
1. Press @ .
2. Be sure you are in PROgram Mode. If not, press ~ until PRO is displayed.
3. Type: NEW0 (ENTER) .
4. Press (SHIFT) (M~) , The PC-2 will then be in RESERVE Mode.
5. Type: NEW (ENTER) .
This procedure will clear the PC-2's Main and Auxiliary memory areas.
CHl-CK t;
OEG
14
PRO
DEF