Radio Shack PC-2 TRS-80 - To Make a Function Key Assignment

If a function key has not been assigned a value and you press it, the symbol above the key (!, #, $, etc.) will be
displayed.
To make a Function Key assignment:
1. Be sure you're in the appropriate Function Key Mode (1/11/111) (press CD and the Indicator will go from I
to II to III). Use I for this example.
2. Press a Function Key ( (II) ~ CfID ). Use (II) for this example.
3. The Display will show:
RESERVE
[ ;::1'
: J.::
DEG
• 1
__ . J
4. Type the characters you want to assign to the key.
5. Press (ENTER) to enter the value.