commands, numeric values, etc.) you want.
Function Keys can be assigned when
the
PC-2
is
in
the
RESERVE Operation Mode. For instructions on assigning
values
to
keys
CID
~
C£ID
,see
RESERVE Mode earlier
in
this manual.
GJ
Reserve Mode Change
An
additional Function Key feature
is
that
the
PC-2
really has 18 Function Keys, not just six.
Press
the
GJ
key a few times. Notice
that
Reserve Mode Indicator (in
the
upper right
of
the
Display) changes
from
I
to
II
to
III and back
to
1.
For details on using
GJ
,see
RESERVE Mode earlier
in
this manual.
(RCL)
Recall Function Key Assignments
The
Recall
Key
(
(RCL)
) acts
as
a "toggle"
between
whatever
is
on the Display
at
any particular time and
the
menu of Function
Key
assignments for whichever Reserve Mode (l/II/III)
is
indicated.
For instance, let's say you are writing a program line (in PROgram Mode) and need
to
use a value assigned to a
Function Key. The problem
is
you've forgotten what values were assigned
to
what key. You can press
GJ
to
recall
the
menus
in
the
different Reserve Modes (see RESERVE Mode) and then, by pressing
(FlCi.)
,yOU
can
To Next Page
Loading...