Radio Shack PC-2 TRS-80 - Page 90

A WAIT statement should always precede a PRINT statement in your program.
The length
of time WAIT holds whatever you told the PC-2 to print depends on the number you specify.
•
WAIT without a specified delay will wait for you to press (ENTER) .
• WAIT 0 causes the information to be displayed faster than you can keep up with it.
• WAIT 65535 holds whatever you want printed for approximately 17 minutes.
•
WAIT 64 holds the display for about one second.
•
WAIT 3840 holds the display for about a minute.
Example
10: FOR X=l TO 100
3C!: F'F: I f'~T >.:;
SC!: Er··iI!
86