16
Note:
The modules must be set to the same house code as
the controller, but not necessarily the same unit codes. In
fact, modules set to unit codes
9
–
16
respond to
ALL LIGHTS
ON
even though your mini controller cannot independently
control modules set to unit codes above
8
. (If you are using
the mini controller as a second controller in a Plug ’N Power
system, you might encounter this situation.)
TURNING OFF ALL UNITS
To turn off all devices that are connected to modules that
you set to the same house code as the controller, press
ALL
UNITS OFF
. This feature is especially useful when you want
to turn off everything at the same time.
61-2677CD.fm Page 16 Tuesday, July 6, 1999 11:05 AM
To Next Page
Loading...
