17
DIMMING LIGHTS
You can dim any lights that are connected to lamp dimmer
modules.
1. Set the mini controller’s selector switch to the desired
unit code range (
1
–
4
or
5
–
8
).
2. Press the
ON
switch for the unit code of the lamp dim-
mer modules you want to dim (
1
/
5
,
2
/
6
,
3
/
7
, or
4
/
8
).
3. Hold down
DIM
until the light dims to the desired level. If
you dim the lights too much, hold down
BRIGHT
to raise
the light level.
Caution:
Do not connect anything other than a lamp to a
lamp dimmer module. The dimmer circuit might damage
other devices.
61-2677CD.fm Page 17 Tuesday, July 6, 1999 11:05 AM
To Next Page
Loading...
Need help?
General
