21
• The switch and outlet modules require direct connec-
tion to your house wiring. If you are not familiar with typ-
ical house wiring installations, we suggest that you
have these types of modules professionally installed. In
any case, be sure that the electricity is turned off at the
circuit breaker while you are installing one of these
modules.
• Low-voltage electricity flows through the circuit con-
trolled by a switch module even when the switch is off.
• Before changing a light bulb, make sure the remote’s
slide switch is set to the left position.
61-2677CD.fm Page 21 Tuesday, July 6, 1999 11:05 AM
To Next Page
Loading...
