Troubleshooting
The PRO-2039 Programmable Scanner should require very little maintenance.
If you have problems, refer to the following for possible solutions.
Problem Probable Cause Solution
Scanner is totally The AC plug is not Check to see that the scanner is
inoperative. properly connected. plugged into a working AC outlet.
Poor or no reception. Improperly connected Check to be sure the antenna is
antenna. properly connected connected.
Poor reception. Move the scanner to a location
with a better reception environment.
Incorrectly programmed Reprogram the frequencies correctly.
frequencies.
Programmed frequencies Avoid programming frequencies
that are the same as listed under Birdie Frequencies,
Birdie frequencies. or only listen to them manually.
ERROR appears on the Programming error. Reprogram the frequencies correctly.
display. frequencies correctly.
Keys do not work or Undetermined error. Reset the scanner
display changes at (see Resetting Initializing the Scanner).
random.
Scanner is on but will The SQUELCH control is Adjust the SQUELCH control
not scan. not correctly adjusted. clockwise (Turning on the
Scanner Setting Volume and Squelch)
In the scan mode, the The SQUELCH control is Adjust the SQUELCH
scanner locks on not correctly adjusted. control clockwise.
frequencies that have
an unclear transmission
To Previous Page
Loading...
