To Next PageTo Next PageHow to unlock keypad on Radio Shack Scanner?
If the keypad on your Radio Shack Scanner does not work, it might be locked. To unlock it, press the FUNC KEY/ LIGHT key. If this doesn't work, the scanner may need to be initialized.
What to do if my Radio Shack Scanner scans slowly?
If your Radio Shack Scanner scans slowly or stops on noise or silence, the SQUELCH control might not be set properly. You should set the SQUELCH according to the instructions. Also, the subaudible squelch mode might not be set for conventional objects. Set the correct subaudible squelch mode.
Why Radio Shack Scanner does not receive digital transmission?
Your Radio Shack Scanner might not be receiving digital transmissions due to several reasons: * The digital channel or talkgroup might not be using APCO-25 digital modulation. The scanner can only receive APCO-25 C4FM/CQPSK IMBE digital signals. * The digital channel or talkgroup might be encrypted. The scanner will not receive encrypted traffic. * The digital channel or talkgroup is being transmitted from a distant location. Reposition the scanner or use an outdoor antenna to improve reception.
What to do if error message appears when trying to upload from computer to Radio Shack Scanner?
If you receive an error message when trying to upload or download to your Radio Shack Scanner from a computer, it could be because your computer is using Windows XP and lacks the necessary USB cable driver. You should download and install the appropriate driver, then try again. Ensure the correct COM port is selected in device manager.
General| Type | Digital Trunking Scanner |
|---|---|
| Display | LCD |
| Dimensions | 9.5 x 3.0 x 6.0 inches |
| Weight | 1.5 lbs |
| Banks | 10 |
| Priority Channels | 2 |
| Memory Banks | 10 |
| Modulation Types | FM, AM, NFM |
| Power Source | AC Adapter or Batteries |
