.
/CLR. To enter the frequency anyway, press E to
accept.
The scanner moves to program mode after you
stored the frequency.
Search Skip Memory
You can skip up to 50 specified frequencies during a
search. This lets you avoid unwanted frequencies or
those already stored in a channel.
Notes:
• You cannot skip frequencies during WX service
search.
• Search skip frequencies are shared by service
search, direct entry search, chain search, and
signal stalker modes. If skip frequencies are set
in certain mode, the frequencies are also
skipped in other search modes and signal
stalker mode.
To skip a frequency, press FUNC + L/O when the
scanner stops on the frequency during a search or a
search hold. The scanner stores the frequency in
memory and automatically resumes the search if it
is not in hold.
To Next Page
Loading...
