Radio Shack PRO-84 - Storing Frequencies into Channels During Service Search

29 Beyond the Basic
s
press FUNC + SVC. Service mode appears on the
display.
When the scanner stops on a transmission, quickly
press HOLD to stop searching and listen to the
transmission. HOLD appears. In this mode, you can
press FUNC + or FUNC + to step through
the frequencies.
To release the hold and continue searching, press
HOLD. Or, if you did not press HOLD, simply press
FUNC + or FUNC + to continue searching.
Note: Because there are many different frequencies
allocated to fire and police departments, it can take
several minutes to search all the service
frequencies.
storing frequencies into channels
during service search
You can store frequencies you found during service
search or service search hold mode into channels.
X Press FUNC + PGM during service search or
service search hold mode. The frequency and the
lowest blank channel alternately appear.
Y Press E to store the frequency into the blank
channel. If you want to select another channel,
press FUNC + or before you press E.
To enter the frequency, press FUNC.