Radio Shack PRO-84 - Program Band Select Mode

Beyond the Basic
s
4
2
program band select mode
You can use this mode to define the search range
used during a chain search in each search bank.
To set the scanner to program band select mode,
press FUNC + B.SLCT. SRCH appears. Then select a
search bank.
When you select the search bank, the lower limit
and upper limit frequency assigned in the search
bank alternate on the display.
To select another search bank, press FUNC +
B.SLCT or FUNC + to increase the search bank
number or FUNC + to decrease it. Hold down
FUNC + or FUNC + for about 1 second to
quickly move through the search bank numbers.
After choosing the search bank, follow these steps
to set the lower limit and upper limit frequency.
X Enter the lower limit frequency by using the 0-9
and
.
/CLR keys.
Y Press E to select the lower limit frequency.
Z Enter the upper limit frequency by using the 0-9
and
.
/CLR keys.
[ Press E to select the upper limit frequency.