Lo On or Lo OFF
Air On or Air OFF
Hi On or Hi OFF
UHF On or UHF OFF
800 On or 800 OFF
[ Repeatedly press or until the option you
want appears, then press E. Otherwise, press
.
/
CLR if you do not want to select it. Then skip to
Step
^.
\ Press E while S-S.Alt appears. One of the
following alert options appears.
ALt bEEP: The scanner beeps when a Signal
Stalker signal is detected.
ALt Light: The scanner flashes the display
backlight when a Signal Stalker signal is
detected.
ALt bP-Lt: The scanner flashes the display
backlight and beeps when a Signal Stalker signal
is detected.
ALt OFF: The scanner does not provide any alert
when a Signal Stalker signal is detected.
] Repeatedly press or until the option you
want appears, then press E to select it.
To Next Page
Loading...
