Radio Shack Realistic PRO-2030 - Troubleshooting

TROUBLESHOOTING
We hope you don't have any problems with your scanner, but if you do, the following suggestions
might help.
Problem Possible Cause Remedy
The scanner does
not function.
Scanner is on but
will not scan.
In the scan mode
the scanner locks
on frequencies
that have an unclear
transmission.
The keys are
inoperative or
the LCD display
is random.
No power.
The SQUELCH control
is not correctly
adjusted.
"Birdies"
The CPU is locked
up.
Check to see that you
plugged the scanner
into a working AC
outlet.
Rotate the SQUELCH
control clockwise.
Avoid programming
frequencies listed in
BIRDIES, or only listen
to them manually.
Reset or initialize
the scanner referring
to RESETTING AND
INITIALIZING THE
SCANNER.
If none of these suggested remedies solves the problem, take your scanner to your local RadioShack
store for assistance.