A LOOK AT THE KEYBOARD
Your scanner's keys might seem confusing at first, but a quick glance at this section should help you
understand each key's function.
• POWER - turns the scanner on and off.
• SCAN - scans through the programmed channels.
• L/O - lets you lock out a selected channel.
• PRI - sets and turns on and off priority for a particular channel.
• LIMIT - used during frequency searches. See SEARCHING FOR AND TEMPORARILY
STORING ACTIVE FREQUENCIES.
• /\ - searches frequencies up from the currently displayed frequency.
• MAN - stops scanning and lets you directly enter a channel number.
• DLY - programs a two-second delay for the selected channel.
• MON - accesses the 10 monitor memories.
• SPEED - changes the scanning or search speed from low to high or high to low.
• \/ - searches frequencies down from the currently displayed frequency.
• Number Keys - each has a single digit followed by a range of numbers. The single digit is the
number entered when you enter a channel number or frequency. The range of numbers (21-30,
for example) indicates the channels that make up a channel storage bank. See
UNDERSTANDING CHANNEL-STORAGE BANKS.
• CLEAR - clears an incorrect entry.
• PGM - programs frequencies into channels.
• WX - scans through the 7 preprogrammed weather channels.
• ENTER - enters program frequencies into channels.
To Next Page
Loading...
