16
Caution: Before plugging the plug into your cigarette
lighter accessory outlet, make sure the cap is screwed
firmly onto the plug. See “Replacing the DC Car Adapter
Fuse” on Page 34 for more information about the cigarette
lighter plug.
3. Insert the cigarette lighter plug on the DC car adapter into
the cigarette lighter accessory outlet.
4. Connect the DC power supply to a standard AC outlet.
5. To connect an external, mounted antenna using the DC car
adapter, attach the female antenna connector on the DC
car adapter to a male antenna connector on the external,
mounted antenna cable.
Then disconnect the antenna connected to the antenna
jack on the walkie-talkie.
21-1672.fm Page 16 Thursday, August 5, 1999 12:04 PM
To Next Page
Loading...
Need help?
General
