Radio Shack TRC-93 - Testing the Battery Power

6
Notes:
• Be sure the case’s metal plates
touch the two metal plates inside
the battery compartment.
• The case fits inside the battery
compartment only one way. Do
not force it.
5. Replace the battery compartment
cover.
Note: If you will not be using the TRC-93
for several months, remove the batteries.
Testing the Battery Power
1. Make sure the TRC-93 is turned on
by turning
OFF/VOL
down toward
VOL
until it clicks.
2. Press
BATT TEST
.
Metal Plates
21-1615.fm Page 6 Thursday, August 5, 1999 11:07 AM