8
OPERATION
Before you use your TRC-93, we recom-
mend you read “CB Operation Tips” on
Page 11, which contains information to
help you use it effectively and courteous-
ly.
RECEIVING 
TRANSMISSIONS
1. Fully extend the TRC-93’s telescop-
ing antenna and hold the TRC-93 so
the antenna is vertical.
2. Set 
CHANNEL
 to 
A
, 
B
, or 
C
.
Note
: Your TRC-93 comes with
Channel 14 crystals installed in
channel position A. To use other
channels, you must first install crys-
tals in channel positions B and C
inside the TRC-93 (see “Adding
Crystals” on Page 15).
21-1615.fm  Page 8  Thursday, August 5, 1999  11:07 AM