Radio Shack Weather Radio - Page 6

6
Preparation
Rain Gauge
Outdoor Thermo/Hygro Sensor
Indoor Thermo/Hygro/Baro Sensor
Solar Transmitter for Anemometer
Solar Transmitter for Rain Gauge/
Outdoor Thermo/Hygro Sensor (2)
Anemometer Base, Arm, and Vane Set
Wind Vane
Wind Cup
AC Adapter
Mounting Hardware
Tools/Additional Supplies Needed
for Installation
In addition to the supplied mounting hard-
ware, you need the following tools and sup-
plies to install your weather station:
• small flat screwdriver
• small Phillips screwdriver
• electric drill
• pencil
• compass
Number
Provided
Description
4M3
×
17 Self-Tapping Screws
2M3
×
12 Self-Tapping Screws
8
1
/
4
inch U-Bolts
16
1
/
4
inch Plain Washers
16
1
/
4
inch Hex Nuts
2 Rubber screw covers