25
TONE
— the Weatheradio sounds an alert. To turn
off the alert and turn on the NWS broadcast, press
WEATHER
.
Notes:
• The STATEMENT, WATCH, or WARNING indi-
cators on the front of the Weatheradio light in
either alert pattern setting.
• See “Setting the Alert Volume” on Page 24 for
more information about adjusting the Weathera-
dio’s alert tone.
Using the Weatheradio’s ‘All Signals’
Code
Your Weatheradio is preset to use a default “all sig-
nals” code of 99, which lets it receive any weather
alert broadcast within the Weatheradio’s reception
range (about a 50-mile radius in most locations).
This code is preset in the Weatheradio’s first memo-
ry location.
To set the Weatheradio to respond only to specific
NWS FIPS codes you select, choose the codes (as
many as two) you want to program (see “Under-
standing FIPS Codes” on Page 9 and “Obtaining
Your Area’s FIPS Code(s)” on Page 11), then pro-
12-251.fm Page 25 Tuesday, March 14, 2000 12:40 PM
To Next Page
Loading...
