12
11
Switch On
Clockwise to turn on the radio volume knob there will be a "KADA" sound , message
sound and the screen will show you "Welcome", while the LED indi cator lightsup
and becomes Green col or if the batt eryis full charged.
Notice: if all LED indicators are forbidden the screen will not light up when switch on the
walkie talkie, but with a message sound .
Notice: if the volume function is forbidden ,there will no any sound when power on . Now,
need to power off the walkie talkie and anticlockwise to rotate the knob until a "KADA"
sound .
Adjust Volume
Clockwise the volume knob to higher the volume or anticlockwise to lower And there shows
a volume line on the screen .
Overvie
Zone Selection
Zones is a channel group .Each radio can set 64 zones and each zone with max 16
channels.
The menu function
1.Press[ ]key to enter the menuFind out "Setting" in the menu "Settings ",Then you can
see "Zone ".
2. Press[ or ] key to zoneafter that with [ ]key to confirm
3.Screen shows current zone.
4. Press[ or ] key to choseafter then press[ ] key to confirm
5.Screen shows the chosen zone, Then back to the screen for the chosen zone.
Launch and Receive
Selection Of Channels , User ID Or Group ID
Select the needed zone (if there are more than one zone ),using the channel knob to select
the channel ,user name or ID ,Or group name or ID.
Receive And Reply Group Call
The radio must be under a group , then can receive the group call.
When receive the group call
1.LED indicator is green color.
2.On the top of the screen will show RSSI mark, Under it, The first line will show " group
call" ,"private call" or "all call", The name of the caller will be shows in the middle ,The