37
Scanning reply
Radio detect active channel/contact group when scanning, at this time radio will stay in the
channel/ contact group, which is called "Scan hang time" pre-programmed time.
Procedure:
1. Hold the radio in a vertical position and keep 1 to 2 inches (2.5 to 5.0 cm) distance from
the mouth.
2. Within the hang time by pressing [PTT]key, LED indicator light is red.
3. Release [PTT] key to respond.
4. If you do not respond within the hang time, radio will continue down the scan.
Start and stop scanning
Press Pre-programmed scan on / off key or enter the scan menu function
When the scan is activated, LED indicator flashes red and displays scan icon ; or when
scanning is disabled, LED light goes out and does not display the scan icon.
Auto Scan: When you select an already activated auto scan channels / contact groups,
radio scans from the activated auto scan channel.
Settings
Technical Parameters
5
To Next Page
Loading...
