Radioddity QT60 - Page 15

13
No. Function LCD Display Values and Descriptions
12
Voltage
protection
OFF: Shut voltage protectio;
ON: Open voltage protection;
Default: ON.
13 Scan Type
SQ: SQ scan function;
TI: Time scan function;
Default: SQ.
14
switch
OFF: Shut frequency adjustment;
R: Open RX frequency adjustment;
T: Open TX frequency adjustment;
RT: Open TX/RX frequency adjustment;
Default: R.
15
FINP:
CLARIFIER
step setup
500Hz: adjustable rage ±500Hz
5KHz: adjustable rage ±5KHz
Default: 500Hz
16
Channel
Frequency
switch
CHAN: Channel adjust;
FREQ: Frequency adjust;
Default: FREQ.
17 ASQ Control
18
Offset
frequency
Frequency range: 100Hz~5MHz;
Default: 100KHz.
19
DW-CH:DW
Set dual watch channel and its mode, band
Turn channel knob to change channel, press
MODE to choose mode, press BAND to choose
band.
20
Set emergency channel and its mode.
Turn channel knob to change channel, press
MODE to choose mode.
21
Set emergency channel and its mode.
Turn channel knob to change channel, press
MODE to choose mode.
22 VOX level
01~09: Total 9 Levels for VOX sensitive.
Default: OFF.
23 VOX delay
01~09: Total 9 Levels for VOX delay time set.
Default:04
24