Radioddity QT60 User Manual

12
BACKGROUND FUNCTION MENU OPERATION
1. Press MENU for 2 seconds to enter menu list;
2. Turn Channel switch to select menu list;
3. Press PUSH to enter the menu setup;
4. Turn channel switch to select wanted setup;
5. Press any other key or wait 5 seconds, the setting will be stored and exit.
No. Function LCD Display Values and Descriptions
1 Mic Gain
1-36, Total 36 levels available;
Default: 25.
2
Microphone
type
EL: Choose EL if use electronic microphone
DY: Choose DY if use dynamic microphone
Default: DY
3
BOTH: the VOL knob controls both the internal speaker
and microphone builtin speaker volume.
Default: MAIN
4
5
OFF: Turn off CTCSS/DCS for RX.
C-XXX: Choose CTCSS code: 67.0-250.3Hz, Total 38 groups;
D-XXX: Choose DCS code: 023N-754N total 104 groups;
Default: C-008(88.5Hz)
6
OFF: Turn off CTCSS/DCS for TX.
C-XXX: Choose CTCSS code: 67.0-250.3Hz, Total 38 groups;
D-XXX: Choose DCS code: 023N-754N total 104 groups;
Default: C-008(88.5Hz)
7
8
9 Monitor Gain
1-32, OFF, Total 33 levels available;
Default: OFF. (Shut NOG function)
10 TOT
1-600s, OFF, Total 10minutes available;
Default: 180S. (Shut TOT function)
11
SWR
Protection
OFF: Shut SWR function;
ON: Open SWR function;
Default: ON.
Note:
This function is valid only when
FREQ.
control path
Volume
Note: Press Scan key can start CTCSS/DCS scan.
Note: Press Scan key can start CTCSS/DCS scan.

Radioddity QT60 Specifications

General

Brand	Radioddity
Model	QT60
Category	Radio
Language	English