Adjust the travels as needed to
match your engine by slowly
moving the stick to each 5 points,
then adjusting the percentage at
that point until the engine is
properly tuned.
to PIONT.
Throttle Stick to P 1， to40%，
Throttle Stick to P 2， to 45%，
Throttle Stick to P 3， to 65%，
Throttle Stick to P 4 ， to55% ,
Throttle Stick to P 5， to 40%,
ACRO only . Optional: increase
mixture when throttle is applied
radpidly-ACCE.(see above for
details)
to ACCE.Push Throttle Stick to idle
Throttle Stick to full open quickly.
Heli only: set curves for another
conditions.
to condition name to next condition name to
edit.
Repeat above steps as needed.
To Next Page
Loading...