RadioLink AT9 - FLAP-TRIM (See GLID 3.3.4); Condition

60
Adjust the spoiler
servo position to 60%
Activate the function.
to MIX ， to ON.
Assign the SPO2-CH.(Ex:
CH3)
to –SPO2- CH ， to CH3，
Adjust the spoiler servo
position. (Ex:
SPO1/SPO2=+55% to
+60%)
to –SPO1-POSI to -50%, ， to 60%,
to –SPO2-POSI to +50%, ， to 60%,
Optional: Set the elevator
rate.(Ex:10%)
to –rate- ELEV ， to 10%，
Optional: set the delay.
(Ex:25%)
to –dly- ELEV ， to 25%，
Close
4.3.13
FLAP-TRIM (see GLID 3.3.4)
4.3.14 CONDITION
Channel 3's function is selectable in the ARBK-FUNC item. (Throttle stick, switches, or knobs) By
choosing except STK, channel 3's function may be separated from BUTTERFLY's function, so channel 3 can
be used for other functions.
ADJUSTABILITY:
• Channel 3's function:
STK: THROTTLE STICK
Sw-A to H: SWITCH A to H
Vr-A to Vr-E: KNOB A to E