RadioLink Electronic Ltd
www.radiolink.com
Gyro Phase
Gyro Phase Test
Make sure attitude calibration is done before gyro phase test. Because flight controller will auto identify
NOR/REV and modify gyro direction when doing attitude calibration.
At Stabilize Mode, hold the aircraft and simulate the actual flight movement to check the gyro phase of
aileron, elevator, and rudder are right or not. There is no need to operate the transmitter when testing the
gyro phase. The movement of aileron, elevator, and rudder at Stabilize Mode are opposite to that at
Manual Mode because the gyro will help aircraft keep balancing.
To Next Page
Loading...
