3.2. Calibrating Gimbals
Each TX12 is calibrated in the QC process however due to varying shipping
conditions we suggest to calibrate your radio before first use.
A. In the system settings, scroll to the HARDWARE page, select the Calibration
item, and press OK to enter the settings.
B. Follow the text prompts at the top for calibration. The first step prompts, press
the confirmation key to start
C. In the second step, place all the gimbals, knobs, and side sliders in the
middle position. The system obtains the midpoint value, and then press the
confirmation key to continue to the next step.
To Next Page
Loading...
