Radius p200 - Talk-Back Scan; Disable Talk-Back Scan; Fixed Priority

16 Operation with Standard Features (cont.)
Talk-Back Scan
This is a standard feature of the channel scan options listed
above. When transmit or receive activity ceases on a scan
channel, a “dwell time” of approximately three seconds occurs
prior to the radio resuming scan for other channel activity. This
“dwell time” gives you time to receive or respond to a call
before scanning resumes. The “dwell time” is programmable
through the Radio Service Software available at your local
Motorola Service Shop.
Disable Talk-Back Scan
This option disables the talkback feature on priority, non-
priority, and PL channel scan. When disabled, pressing the
PTT switch allows you to transmit on the channel selected
when in the scan mode.
Fixed Priority
This option enables:
– a fixed priority channel on Priority Channel Scan
– a fixed transmit channel on Priority or Non-Priority Channel
Scan when ordered with the Disable Talk-Back option.
The procedure for programming channel scan is as follows:
1. Turn the radio on.
2. To enter the program mode, press and hold the “Channel
Scan” program button, and while keeping the button
depressed, place the mode select switch (3-position switch)
in the scan ( ) position. A continuous alert tone will be
generated and remain alerting until the L/S program button
is released. This alert tone indicates that the radio is in the
program mode and that transmit and receive functions are
inhibited.
?W2@@@
?7@@@@
?@@@@@
?@@@@@@@@@@@@@@@@@@@@@@@@@
?@@@@@@@@@@@@@@@@@@@@@@@@@
?@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@0Y@@@@@
?O2@@@@0M??@@@@@
?O2@@@@0M?
?O2@@@@0M?
?O2@@@@0M?
@@@@@6KO2@@@@0M?
@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@6X?
@@@@@@@@@@@@@@@@@@@@@@@@@@@@)?
@@@@@@@@@@@@@@@@@@@@@@@@@@0M
@@@@@@
@@@@@@
?@@@@@@@@@@@@@@@@@@@@?
?@@@@@@@@@@@@@@@@@@@@?
?@@@@@@@@@@@@@@@@@@@5?
@@@@@0Y?
?O2@@@@0M?
?O2@@@@0M?
?O2@@@@0M?
?O2@@@@0M?
?O2@@@@0M?
@@@@@@
@@@@@@@@@@@@@@@@@@@@@6X?
@@@@@@@@@@@@@@@@@@@@@@)?
@@@@@@@@@@@@@@@@@@@@0M