Page 1
Reactor-Ready - Lab Reactor
Index
P
age 1 Index
Page 2 1. Introduction
2. Warranty
P
age 3 3. Safety Information
4. Important WARNINGS
Page 4 5. Products & Accessories
Page 5 6. Component Guide
Page 6 7. Quick Start Guide
Page 7 7. Quick Start Guide - Continued
Page 8 8. Set-Up & Operation - Continued
8.1 Optimising the thermal performance of Reactor-Ready
8.2 Operating temperature range
8.3 Setting up Reactor-Ready
Page 9 8. Set-Up & Operation - Continued
8.4 Assembling the Manifolds
Page 10 8. Set-Up & Operation - Continued
8.5 Locating the support braces
Page 11 8. Set-Up & Operation - Continued
8.6 Preparing the reaction vessel
Page 12 8. Set-Up & Operation - Continued
8.7 Assembling the vessel lid, stirrer guide and probe
Page 13 8. Set-Up & Operation - Continued
8.8 Assembling the thermofluid hoses
8.9 Assembling the Overhead Stirrer
Page 14 8. Set-Up & Operation - Continued
8.10 Choosing your thermoregulator (recirculator)
8.11 Choosing your thermofluid
Page 15 8. Set-Up & Operation - Continued
8.12 Connecting the thermoregulator
8.13 If adapters and isolating valves are not to be used
8.14 If adapters and isolating valves are to be used
8.15 Charging Reactor-Ready with thermofluid
Page 16 8. Set-Up & Operation - Continued
8.16 Draining thermofluid from Reactor-Ready
8.17 Disconnecting the thermoregulator
Page 17 9. General Specifications
10. Routine Maintenance
Page 18 11. General Information
11.1 Materials of Construction
11.2 Vacuum & Pressure
11.3 Use of zero dead space stopcock
11.4 Safe Delta T (ΔT)
Page 19 WARRANTY - FAX BACK
To Next Page
Loading...
