RADWAG PS X2 Series User Manual

- 127 -
Set ambient conditions state
Format: EV_n <CR><LF>
Response options:
EV_OK <CR><LF>
– command carried out
EV_E <CR><LF>
– error in-course of command execution, no parameter or incorrect format
EV_I <CR><LF>
– command understood but not accessible at this moment
n – parameter, decimal value determining ambient conditions state
n → 0 – unstable ambient conditions
1 – stable ambient conditions
CAUTION!
Command changes settings for a current working mode.
An example:
Command:
EV_1<CR><LF>
– set value ‘stable’ for ambient conditions option
Response:
EV_OK<CR><LF>
– ambient conditions option set to value ‘stable’
<AMBIENT CONDITIONS> parameter is set to value <STABLE> until command EV 0 swaps it to
value <UNSTABLE>.
Set filter
Format: FIS_n <CR><LF>
Response options:
FIS_OK <CR><LF>
– command carried out
FIS_E <CR><LF>
– error in-course of command execution, no parameter or incorrect format
FIS_I <CR><LF>
– command understood but not accessible at this moment
n – parameter, decimal value determining filter number
n → 1 – very fast
2 – fast
3 – average
4 – slow
5 – very slow
CAUTION!
The numbering is assigned to a particular filter name and it is identical for all balance types.
The command changes settings for a current working mode if, for a particular balance type, filter settings are
assigned to the working mode.
An example:
Command:
FIS_3<CR><LF>
– set average filter
Response:
FIS_OK<CR><LF>
– average filter set
Set Value release
Format: ARS_n <CR><LF>
Response options:
ARS_OK <CR><LF>
– command carried out
ARS_E <CR><LF>
– error in-course of command execution, no parameter or incorrect format
ARS_I <CR><LF>
– command understood but not accessible at this moment
n – parameter, decimal value determining value release options
n → 1 – fast
2 – fast+reliable
3 – reliable
CAUTION!
The numbering is assigned to a particular value release option and it is identical for all balance types.
The command changes settings for a current working mode if, for a particular balance type, value release
settings are assigned to the working mode
An example:
Command:
ARS_2<CR><LF>
– set value release parameter to fast+reliable option
Response:
ARS_OK<CR><LF>
– fast+reliable option set

RADWAG PS X2 Series Specifications

General

Brand	RADWAG
Model	PS X2 Series
Category	Scales
Language	English