RADWAG PS X2 Series User Manual

- 71 -
• Bar graph colour corresponds to the current status of weight:
 Yellow colour: weight value below Target Value - Tolerance
 Green colour: weight value within tolerance, Target Value +/- Tolerance
 Red colour: weight value above Target Value + Tolerance
PROCEDURE 2 – target value entered manually
• Press < Target Value> button,
• Window with an on-screen numeric keyboard is displayed, use it to enter the target value,
• Confirm the entered value,
• Window with an on-screen numeric keyboard is displayed again, use it to enter the sampling
tolerance value,
• Confirm the entered value, home screen of the mode is displayed.
16. PERCENT WEIGHING
< Percent weighing> is a working mode for comparison of a measured sample with the
reference mass. The result is expressed in [%].
Procedure for activation of Percent Weighing mode

RADWAG PS X2 Series Specifications

General

Brand	RADWAG
Model	PS X2 Series
Category	Scales
Language	English