RADWAG PS X2 Series User Manual

- 63 -
13. PARTS COUNTING
< Parts counting> is a working mode enabling determination of quantity of small parts with
equal weight. Determined mass of a single part is used for the counting procedure. The single part
mass may be:
• determined from a reference quantity of parts subjected to weighing,
• acquired from database of products,
• entered manually as a numeric value.
Procedure for activation of Parts Counting mode
Select < Parts counting> mode, home screen featuring parts counting pictogram in a top bar
is automatically displayed.
Info field provides the following information:
• Gross weight,
• Tare weight,
• Net weight,
• Part mass,
• Product,
• User,
• Keys: parameters, adjustment, print header, print footer, set part mass, determine part mass
(from a reference quantity of parts), determine mass using 10 parts, product, user, databases.
13.1. SUPPLEMENTARY SETTINGS FOR PARTS COUNTING MODE
The supplementary settings enable adjusting the working mode to your needs and requirements. To
access the settings follow the below procedure.
Procedure:

RADWAG PS X2 Series Specifications

General

Brand	RADWAG
Model	PS X2 Series
Category	Scales
Language	English