Send all implemented commands
Set ambient conditions state
Cooperation with PUE 7.1, PUE 10 terminal
CAUTION!
Each command must end with CR LF characters;
27.2. RESPONSE FORMAT
On receipt of a command, the terminal sends a response in one of the following formats:
command understood and in progress
command carried out (appears only after the command XX_A)
command understood but not accessible at this moment
command understood but max threshold is exceeded
command understood but min threshold is exceeded
time limit exceeded while waiting for a stable measurement result
(time limit is balance characteristic parameter)
XX - stands for a name of a sent command
_ - stands for spaces
Commands Overview
- command understood and in progress
- command understood and in progress
- command understood but zeroing range is exceeded
- command understood and in progress
- time limit exceeded while waiting for stable measurement result
- command understood but not accessible at this moment
- command understood and in progress
- command understood and in progress
- command understood but taring range exceeded
- command understood and in progress
- time limit exceeded while waiting for stable measurement result
- command understood but not accessible at this moment
To Next Page
Loading...
Need help?
General