Option enables printing out the value of VARIABLE
Option enables printing out net weight value in a
basic unit (calibration unit).
Option enables printing out the tare value in the
current unit.
Option enables printing out the gross mass value
in the current unit.
Option enables printing out the current
measurement result (NET weight) in a current unit.
Option enables printing out a report from the last
adjustment, according to the settings declared for
the adjustment report printout (see sec. 14.1 of this
Option enables printing out separating dashes.
Option enables printing out an empty separating
line.
Option enables providing an area for the signature
of a user performing the adjustment.
Option enables printing out one of 100 non-
standard printouts on the footer printout. You can
choose one of the following options: NONE / non-
standard printout name. The way of entering non-
standard printouts is described further down this
user manual.
GLP printout
Footer
For the parameters described above, one of these values must be selected:
NO - do not print
YES - print
Exemplary reports:
Header
To Next Page
Loading...
Need help?
General