CAUTION!
• Components of density determination kit shall be stored in a respective box.
• Weighing pans and sinker shall not be put directly on a table, this might cause their damage.
• Weighing pans and sinker, if not operated, shall be put on an additional stand.
• If the kit has been installed and -nuLL- message is displayed than the balance shall be loaded with
weights set (12). Thus prepared balance can be used for density determination.
Procedure for activation of Solids Density mode
Select <
Solids Density> mode, home screen featuring solids density pictogram in a top bar is
automatically displayed.
Info field provides the following information:
• Weighing in air,
• Weighing in liquid,
• Liquid,
• Liquid density,
• Temperature,
• User,
• Keys: parameters, adjustment, print header, print footer, product, user, start, databases.
To Next Page
Loading...
Need help?
General