To Next Page

To Previous Page

- 92 -

• boost mixture weight, weigh as much as required to provide specified weight value,

• press button to confirm, mixture dosing ends, formulation report is printed and recorded in a

database (read next section of this manual to view an example of the report), the following

message is displayed:

• press button in order to proceed to other opersations.

or:

• with the last ingredient dosed and weighed, press button,

• wait to see the following message: , press button

again in order to resign from boosting mixture weight to a specified value, if there is such a

need,

• wait to see the following message: ,

• press button to confirm, mixture dosing ends, formulation report is printed and recorded in a

database (read next section of this manual for an example of the report), the following message

is displayed:

• press button in order to proceed to other opersations.

PROCEDURE 2 – Preparing formulation that is saved in the Formulation Database. Basic option for

creating recipes.

Following the prompts:

• load container intended for the ingredients,

• go to quick access bar and press Start < > button,

• list of formulations is displayed, select the formulation that is to be carried out,

RADWAG PS X2 Series User Manual

Questions and Answers: