Rage Eclipse 1M - User Manual

Specifications
Hull Width
220 mm (8.66”)
Hull Length 1000 mm (39.37”)
Height from bottom of hull 1790 mm (70.50”)
Total Height 2130 mm (83.87”)
Weight 3.15 kg (6.94 lbs.)
Total Sail Area
Servos Sail winch servo and rudder servo
Instruction Manual
6050 cm (937.75 in )
2
2

Summary

Specifications

Introduction

Safety Precautions and Warnings

Installation and Rigging Guide

Initial Assembly Steps

Assemble the display stand, attach the ballast and keel, and install the rudder.

Mast and Sail Rigging

Connect the mast, hang sails, and attach forestay and backstay cords according to instructions.

Cord Attachment and Sail Clipping

Attach remaining shrouds and jib sail cords, and connect jib and main boom cords to the hull.

Sail Adjustments

Adjust silicone ring positions on the main and jib booms for optimal sail tension and performance.

Boom and Mast Adjustments

Adjust mast bend, jib sail, jib boom, and deck distance for proper sail control and balance.

Final Rigging Adjustments

Tighten or loosen main sail, adjust main sail bend, and set main boom height for optimal sailing.

Bind Transmitter and Receiver

Transmitter Functions Instruction

How-to-sail Instruction

Sail Checklist

Troubleshooting Guide

Charging Instruction

Eclipse Spare Parts

Limited Warranty

Rage Eclipse 1M Specifications

General

Brand	Rage
Model	Eclipse 1M
Category	Toy
Language	English