Do you have a question about the Rage stinger 240 and is the answer not in the manual?
Specifies the minimum age requirement for using this product.
Crucial safety instructions for handling, charging, and using LiPo batteries.
Install blade guards by aligning pegs with motor pod holes for proper fit.
Instructions for inserting AA batteries into the transmitter.
Attach the camera mount to the battery door and slide the camera into place.
Steps to arm the drone for flight, indicated by beeps and LED lights.
Prepare the drone for flight by placing it on a level surface and powering on.
Initiate automatic take-off to a set height or automatic landing sequence.
Explanation of flight modes: Low (30%), Mid (60%), and High Rate (100%) response.
Fine-tune drone behavior to eliminate drift using trim levers.
Instructions for turning the drone's LED lights on or off via the transmitter.
Engage 3D flip mode for aerial stunts, requiring specific altitude.
Function to fly the aircraft back towards its starting direction for orientation.
Guide to installing the app and using VR goggles for an immersive experience.
Instructions for attaching the phone mount to the transmitter.
List of available spare parts and contact information for ordering.
| Model | Rage Stinger 240 |
|---|---|
| Frame Size | 240mm |
| Motors | 2204 2300KV Brushless |
| ESC | 20A |
| Flight Controller | F3 |
| Video Transmitter | 200mW 5.8GHz |
| Antenna | SMA |
Loading...