Rage Super Cub MX - Charging the LiPo Battery; Binding Process

4
Charging the LiPo Battery
ItisimportanttofullychargetheLiPoightbaerybefore
yourfirstight.
TheUSBchargercanbepoweredbytheUSBportonyour
computerorawallplugUSBport.Plugthechargerintoa
suitableUSBportandthenplugtheightbaeryintothe
charger.Aredlightwillilluminateandblinkduringcharging.
Whenthechargeiscompletetheredlightwillgoout.
CAUTION: ONLY CHARGE THE FLIGHT BATTERY WITH THE INCLUDED USB LIPO CHARGER OR A
SUITABLE LITHIUM BATTERY CHARGER. NEVER ATTEMPT TO CHARGE A LIPO BATTERY WITH A
CHARGER THAT IS NOT SPECIFICALLY MADE FOR USE WITH LITHIUM BATTERIES.
Super Cub MX RTF Contents
BindingistheprocessofprogrammingthereceivertorecognizetheGUID(GloballyUnique
Idenfier)codeofasinglespecifictransmier.Whenareceiverisboundtoatransmier,the
receiverwillonlyrespondtothatspecifictransmier.
Ifyouneedtorebindforanyreason,pleasefollowthesesteps:
• Makesurethetransmieristurnedo,thethroleiso(scktoboom)andthe
 PASSswitchisintheParalorFullAssistposion.Plugtheightbaeryinwhile
 keepingtheairframesllforgyrocalibraon.
• Turnonthetransmierwithin5seconds.
• ThereceiverLEDwillashfor3-5secondsandthenbindautomacally.
• Oncebound,theLEDwillremainsolidlylit.
Binding